1.02 26 1.22 31 0.141 0.002 3.6 0.1 hole for 3.5mm plug 0.138 thru 0.230 [5.8] x 82 (2) places ref 2.06 52.4 0.21 5.4 0.083 2.1 ref 0.19 4.8 sleeve terminal 0.09 [2.4] hole 3.5mm phone jack e series housing retaining nut 0.929 23.6 ref 0.13 3.2 tip and ring terminals 0.05 x 0.13 [1.3 x 3.2] slot tip and ring terminals 0.748 19 0.945 24 0.945 24 0.138 3.5 (2) places recommended panel cut-out sleeve terminal tip terminal ring terminal eh35mmssc & eh35mmsscb sleeve terminal tip terminal eh35mmmsc & eh35mmmscb ring terminal ring normal terminal tip normal terminal tip terminal EH35MMSNSC & EH35MMSNSCb sleeve terminal EH35MMSNSC shown notes: 1. materials: housing - zinc alloy, see table for finish retaining nut - brass, nickel plated 3.5mm phone jack: jack housing - brass, nickel plated springs - nickel silver insulators - thermoplastic insert overmold - thermoplastic 2. shipped assembled without panel mounting hardware. add "pkg" suffix to include mounting screws and individual packaging. 3. these products are rohs compliant. part number description e series housing finish eh35mmmsc eh series 3.5mm jack, 2-conductor mono nickel eh35mmmscb eh series 3.5mm jack, 2-conductor mono black chrome eh35mmssc eh series 3.5mm jack, 3-conductor stereo nickel eh35mmsscb eh series 3.5mm jack, 3-conductor stereo black chrome EH35MMSNSC eh series 3.5mm jack, 5-conductor stereo normaled nickel EH35MMSNSCb eh series 3.5mm jack, 5-conductor stereo normaled black chrome do not scale drawing revisions apvd by date eco number rev rev part no. name of sheet apvd chkd by date drawn scale first used on spec no. spec no. material finish unless otherwise specified temper lbs/m mult width size this drawing describes a design considered proprietary in nature, developed and manufactured by switchcraft inc. and is released on a confidential basis for identification purposes only. b a 25459 10/20/06 rs tjk 1.5:1 10/17/05 pnk rs 6/24/09 tjk 8/27/09 1 1 eh series 3.5mm phone jack eh35mm series a 1. all dimensions in inches - two place decimals 0.02 - three place decimals 0.005 solidworks cad file customer drawing
|
